Noise and vibration measurements in a Viking military vehicle

Noise and whole-body vibration measurements were made in a Viking military vehicle to determine the variation that should be expected during repeat measures, the effect of speed (up to 60 km/h in 5 km/h increments), and during travel over different types of terrain (comprising concrete road, gravel track and rough cross-country). Measurements were made at various crew positions (including the driver and commander) in both the front and the rear cabs in the vehicles. Three translational axes of vibration were measured in each seat. Two speeds were investigated over road (35 km/h and 55–60 km/h) and gravel (20 km/h and 35 km/h) surfaces. The effect of varying speed of the vehicle on the measured noise and vibration magnitudes was also investigated. The highest sound pressure level (L_Aeq) of 104 dB(A) was measured at the commander’s standing position during travel over concrete road at 55 km/h. Higher noise levels occurred for a standing commander compared with when sitting on the seat. A maximum single axis frequency-weighted vibration magnitude of 1.0 m/s² r.m.s. was measured on the driver’s seat during travel over track at 35 km/h. Higher vibration magnitudes occurred during travel over track compared with travel over road. Both noise and vibration exposure of crew within the Viking vehicle increased with increasing speed of the vehicle.     

Static and free vibration analyses of functionally graded porous variable-thickness plates using an edge-based smoothed finite element method

The main purpose of this paper is to present numerical results of static bending and free vibration of functionally graded porous (FGP) variable-thickness plates by using an edge-based smoothed finite element method (ES-FEM) associate with the mixed interpolation of tensorial components technique for the three-node triangular element (MITC3), so-called ES-MITC3. This ES-MITC3 element is performed to eliminate the shear locking problem and to enhance the accuracy of the existing MITC3 element. In the ES-MITC3 element, the stiffness matrices are obtained by using the strain smoothing technique over the smoothing domains formed by two adjacent MITC3 triangular elements sharing an edge. Materials of the plate are FGP with a power-law index (k) and maximum porosity distributions (Ω) in the forms of cosine functions. The influences of some geometric parameters, material properties on static bending, and natural frequency of the FGP variable-thickness plates are examined in detail.     

Quasi-steady aerodynamic characteristics of Terminal Sensitive Bullets with short cylindrical portion

The aerodynamic characteristics are vital for short cylindrical Terminal Sensitive Bullets(TSB)with low aspect ratio,especially in terminal trajectory.Currently,there is little research in terms of the TSB and short cylinder with two free ends,and particularly in this trajectory,where the scanning angle β and roll angle α vary over a broad range between 0° and 180°.In this work,wind tunnel experiments are first conducted to learn the effects of Reynolds number and scanning angle on aerodynamic parameters for short cylinder with aspect ratio L/D = 1.Similar to infinite cylinder,for the short cylinder with two free ends,the drag crisis phenomenon still exists in the critical regime 1.7 × 105 ≤ Re ≤ 6.8 × 105.Then 3D simulations are performed to demonstrate the aerodynamic characteristics of short cylinder and TSB over a broad range of Re,L/D,α and β.The sensitivity analysis of time step and grid are presented as well.When β=0°,for short cylinder,the drag crisis phenomenon was also observed in the simulation,but not as obvious as in the wind tunnel test.In some attitudes,there is an obvious Kármán vortex in the wake of short cylinder and TSB.The correlation between time-averaged aerodynamic coefficients and L/D,Re,α&β is discussed.The vortex shedding frequency and shear layer behavior are obtained for quasi-steady and unsteady flow.Finally,the effect of end's shape on drag reduction and vortex shedding frequency is analyzed.     

水下声探测系统载体振动干扰分析及抑制方法

针对水下探测系统载体振动对目标回波信号的微多普勒特征谱产生干扰的问题,从干扰产生的基本原理出发,推导了干扰的近似乘性表达式。在获取振动干扰数据的条件下,提出了针对乘性干扰的干扰抑制算法,并针对推导干扰乘性表达式时的近似条件,分析了近似算法带来的误差。仿真结果表明,该方法可有效抑制水下探测系统平台振动对目标回波信号的微多普勒特征谱产生的干扰,并且在绝大多数情况下,由算法带来的误差可以忽略不计。     

舰船管路橡胶减振器的应用

简要分析了管路橡胶减振器对刚性管路的隔振原理,提出了几种通过改变管路布置形式而达到对管路各自由度上减振的方法,阐述了在实际应用中如何调整橡胶隔振器的固有频率而达到对舰船管路良好的隔振.     

小波理论在大型空间智能结构振动控制中的应用

采用最优控制理论设计智能结构主动振动控制器,针对大型空间智能结构的低频和密频的特性,基于小波尺度函数变换,设计了智能结构的传感器、致动器;最后通过针对某大型空间智能桁架结构的仿真,表明该控制方法是行之有效的。     

强迫振动法大跨度桥梁节段模型气动导数辨识

研制了桥梁节段模型颤振导数测定的二维强迫振动实验装置,采用变频调速技术实现对振动频率的控制,模型惯性力、气动力的测量采用了特殊设计的测力元件,模型运动用压电式加速度计进行测量。实验时,模型分别作单自由度的竖弯或扭转的简谐运动,通过测量模型所受到的气动力及模型位移,应用谱分析方法和非线性曲线拟合算法实现了对八个颤振气动导数的辨识,并通过平板模型实验数据与Theodorsen理想平板数据及国外文献数据对比对实验装置及辨识算法进行了检验。     

随机快速光滑二阶滑模末制导律设计

针对目标随机机动、惯性延迟、参数变化等因素降低导弹末制导精度的问题,提出新型随机快速光滑二阶滑模控制方法。将目标机动简化为零均值高斯白噪声过程,制导系统成为带加性噪声随机不确定非线性系统。考虑到该系统不存在平衡点,提出有限时间二阶均方实用收敛概念,并基于此证明了所设计控制律的收敛特性。根据直接命中条件设计滑模面,得到随机快速光滑二阶滑模制导律。在尾追和迎头两种态势下,将该新型制导律与扩展比例导引、一般滑模制导律及确定性光滑二阶滑模制导律进行仿真比较,验证了该方法的正确性和有效性。     

导弹系统安全性分析中的引发事件鉴别方法

引发事件鉴别是基于事故机理安全性分析的首要任务。鉴别结果是否全面、完整直接影响最终分析结果的有效性。导弹系统安全风险涉及面广、影响因素多,需要系统的可操作方法来指导引发事件的鉴别工作。针对导弹工作特点,提出考虑导弹任务剖面,运用主逻辑图对导弹进行系统性的层次化描述,对引发事件进行整理和归纳。将危险与可操作性分析引入导弹系统安全性分析中进行引发事件鉴别,结合故障模式影响分析,支持对单一故障类和参数异常类引发事件的鉴别。结果表明,所提框架为解决导弹系统安全性分析中引发事件鉴别的系统性完整性提供了可行的思路。     

潜艇纵向振动计算及振动特性

采用有限元方法建立了潜艇纵向振动分析有限元模型,求出了某艇在水面巡航状态的纵向振动模态.发现潜艇耐压壳纵向振动除具有典型的“活塞”式振动特征外,还具有众多与“一维梁”纵向振动不同的特性.